Bambu PLA Silk
Bambu PLA Silk offers a silk-like and high-glossy that adds a luxury appearance to your prints while retaining PLA's ease of use. Different with other silk filaments, Bambu PLA Silk was toughened and demonstrates greater resistance to breakage when using AMS printing. It's ideal for decorations, artistic projects, and 3D character models or any parts where you want it shinier.
Silk-like appearance with ultra-high gloss
Bambu PLA Silk brings a silk-like appearance and long-lasting high gloss to your 3D prints, transforming models into stunning art.
Silky appearance shining glow
PLA Matte VS PLA Silk
Display of Silk Prints
Bambu PLA Silk is ideal for decorations, artistic projects, and 3D character models or any parts where you want it shinier.
Enhanced Toughness & AMS Compatible
Compared with regular PLA Silk, Bambu PLA Silk was toughened and demonstrates greater resistance to breakage when using AMS printing.
Controllable gloss
The appearance gloss of the model printed by Silk material can be controlled by printing temperature and speed. To get glossier finishes, higher printing temperatures and/or lower speeds are recommended.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Cool Plate, High Temperature Plate or Textured PEI Plate | Engineering Plate |
| Hotend | Hotend with Hardened Steel Nozzle (0.4 mm) Hotend with Stainless Steel Nozzle (0.2 mm, 0.4 mm) |
Hotend with Hardened Steel Nozzle (0.6 mm, 0.8 mm) |
| Glue | Liquid Glue / Glue Stick | / |
| Recommended Printing Settings | |
| Drying Settings before Printing | 55 °C，8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 210 - 240 °C |
| Bed Temperature (with PVP Glue) | 35 - 45 °C |
| Printing Speed | < 250 mm/s |
| Physical Properties | |
| Density | 1.32 g/cm³ |
| Vicat Softening Temperature | 56 °C |
| Heat Deflection Temperature | 53 °C |
| Melting Temperature | 152 °C |
| Melt Index | 20.5 ± 1.2 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 35 ± 3 MPa |
| Breaking Elongation Rate | 3.5 ± 0.6 % |
| Bending Modulus | 2220 ± 90 MPa |
| Bending Strength | 77 ± 3 MPa |
| Impact Strength | 24.5 ± 1.7 kJ/m² |
Printing Tips
• To obtain better printing quality and avoid strings or material leakage, please dry the filaments before printing. Please refer to: Filament drying cover on WIKI.
What's in the Box
Filament with Spool*1 & Desiccant*1
Filament Label*1
Package*1