RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings before Printing | 80 °C，12h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 260 - 290 °C |
| Bed Temperature (with PVP Glue) | 80 - 110 °C |
| Printing Speed | < 100 mm/s |
| Physical Properties | |
| Density | 1.17 g/cm³ |
| Vicat Softening Temperature | N / A |
| Heat Deflection Temperature | N / A |
| Melting Temperature | 255 °C |
| Melt Index | 29.2 ± 2.1 g/10 min |
| Mechanical Properties | |
| Tensile Strength | N / A |
| Breaking Elongation Rate | N / A |
| Bending Modulus | N / A |
| Bending Strength | N / A |
| Impact Strength | N / A |
What's in the Box
Filament with Spool*1 & Desiccant*1
Filament Label*1
Package*1
Attribute Comparision
| Support for PLA | Support for PA/PET | |
| Color | White | Green |
| Nozzle Temperature | 210-230°C | 270-290°C |
| Bed Temperature | 35-45°C | 80-100°C |
| Print Speed | <200mm/s | <100mm/s |
| Water Soluble | No | No |
| Recommended for | PLA | PA-CF, PA-GF, PET-CF |
| Cannot be used with | PA-CF, PA-GF, PET-CF, ABS, PETG, TPU, ASA | PLA, ABS, PETG, TPU, ASA |
1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.
2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.