Bambu Lab AMS Hub
Bambu Lab AMS Hub
Bambu Lab AMS Hub Bambu Lab AMS Hub

Bambu Lab AMS Hub

SKU: SA002-N

¥9,680 円

税込価格

Compatibility:
Quantity:
¥9,680 円

  • 日本国内倉庫から2営業日以内出荷（配送規約はこちら）
  • 14日間の返品・返金サービス（保証規約はこちら）
  • 安心保証期間（保証規約はこちら）
  • 充実のサポート体制

  • American Express
  • Apple Pay
  • Google Pay
  • JCB
  • Mastercard
  • PayPal
  • Visa
  • PayPay
  • Rabbit Line Pay
  • Rakuten Pay
  • FamilyMart
  • Lawson
  • Daily Yamazaki
  • Ministop

Overview

The AMS Hub is used to expand the number of AMS connected to Bambu X1 series printers from 1 (4 channels) to a maximum of 4 (16 channels) to improve the refueling speed across your multiple AMS units and support the redundancy of a buffered signal.

In the Box

2x Bus Cable - 6pin, 1xPTFE Tube, 2x M3*28 Screw

How-to video

 

Check out our Wiki article : Connect AMS Hub and Multi-AMS

Installation

 

  • Install the AMS Hub on the back of the printer, replacing the Filament buffer if you have one, and use the matching Bambu 4 Pin cable to connect to the printer, use the Bambu 6 Pin cable to connect to the first AMS, then continue to use the 6-pin cable to connect the remaining AMS in series.
  • Use the matching PTFE Tube to connect the AMS Hub and the air tube connector on the back of the printer, the tube should pass between the 4-pin plug and the spool holder to reduce the resistance.
  • According to the placement of the AMS and the printer, you can choose the appropriate length of the PTFE tube to connect the AMS and the AMS Hub. The tube should be as short as possible and avoid winding to reduce the feeding resistance.

    •  


    AMS Hub Tech Specs

    Product Size
    140*60*22 mm
    Package Size
    235*167*40 mm
    Product Weight 84 g
    Gross Weight 321 g
    Material Plastic, metal, printed circuit board
    Input 24V 3A
    Color Gray