Overview
The front door mounting kit is used to connect the front door glass to the printer.
Compatibility
X1 Series Exclusive
In the Box
Front door upper hinge *1
Front door lower hinge *1
Silicone strip for door frame *1
Door Frame magnet *2
Front door upper hinge screws *2
Lower front door hinge screws *2
Installation of Front Door Mounting Kit
Remove the front door, the upper hinge of the front door, the left panel of the machine, and the lower hinge of the front door (use pliers to bend the bottom of the post to remove the lower hinge of the front door)
Replace the new front door upper hinge and front door lower hinge
Tear off the silicone strip of the door frame and remove the double-sided tape left on the door frame
Use a flathead screwdriver to pry the magnet off the door frame and glue the new magnet on with Glue 502
Replace the new door frame silicone strip
Install new/old front door
Please check the link to replace the front door mounting kit: https://wiki.bambulab.com/en/x1/maintenance/front-door-mounting-kit
